|
Magnetic Car
Sign Care & Use Instructions
Applying & Removing Flexible Magnet
Only affix to smooth, flat or gently curved
metallic surfaces.
Make sure the entire magnet is flat against
the metal surface (i.e., no air pockets).
If you place the magnet in the wrong
position, completely remove the magnet from the
surface and reaffix. Do not pull the magnet
across the surface, or it may stretch due to the
resistance caused by the high magnetic strength.
Lift from largest area first letting smaller
parts follow.
Use caution removing magnet from vehicle,
especially around ears, tails, & legs of cutout
magnetic silhouette. Lift from largest part of
magnet first, gently let legs, tail, ears
follow. Thinner bodied silhouettes require more
care.
Avoid use on horizontal metal surfaces
exposed to direct sunlight (such as automobile
hoods) or temperatures exceeding 150º F.
Be aware that long-term use on surfaces
frequently exposed to sunlight (such as
vehicles) can result in uneven fading of the
surface because the magnet-covered area is
shielded from ultraviolet rays.
Avoid use on non-metallic body fillers,
simulated wood grain siding and repainted
surfaces.
Storing Flexible Magnet
Do not stack with magnetic sides facing each
other.
Store on a smooth, dry steel surface
(refrigerator, file cabinet, washer, dryer)
Cleaning Flexible Magnet
To guard against moisture and dirt buildup
between the magnet and the metal surface
(particularly on outdoor applications), remove
the magnet at regular intervals.
Clean both the magnet and metal surface with
mild detergent; wipe with a soft cloth or allow
to air-dry. (For vehicle-mounted signs, remove
and clean WEEKLY.)
To protect fresh clear coat, base coat and/or
vinyl surfaces on NEW cars and trucks, remove
magnetic signs DAILY.
Please Note
Not all vehicles are
made of steel. Some vehicles use combinations of
steel, aluminum, plastic, and/or
fiberglass. These magnets are for use only on
painted steel. Please check the area of your
vehicle where you are planning to use these
magnets with a magnet to determine that it is
steel. Magnets are not returnable.
Our magnets are cut from high quality 30 mil
outdoor sheeting. With proper care they should
last many years. With proper installation
magnets will remain on vehicle above legal
highway speeds, however we cannot be responsible
for loss from vehicle. When parking vehicle in
"questionable" areas, remember that magnets can
be removed by others. When in doubt remove
magnets and store temporarily on a flat surface.
Minor surface blemishes are normal in this
product. They will not be noticeable from the
normal viewing distance. |
